Mega Power Machine Cutting Lube, knife life extender

Machining Cutting Speed, Knife Life Enhancer from Mega Power.Machining Cutting Speed, Knife Life Enhancer from Mega Power.

Machine Cutting Lube.

Mega Power Machine Cutting Lube... 

Industrial lathe cutting aid.

Benefits:

    This industrial cutting aid increases metal removing speed, and cutting debt, while extending knife edge life by ten.

    Simply add Mega Power to your cutting fluid for a 1% ratio.

    Increase production output, lower electric amp draw by 10%. Extend cutting tool tip life 4 to 10 times before retooling.

    Often doubles fluid life before change out.

    Hundreds of dollars down time is avoided while production output increases.

    Sold in 6 pak gallons $450, and drums $2500.

    Why Mega Power Machine Cutting Lube Works. See Video: Solve friction, wear, leak problems.

Contact Info: Question/Phone/email/Ordering

    George Chris 512 665 3388
    megapower@grandecom.net
    Mega Power Products Distributor
    Technical Adviser
    210 Durango Street
    San Marcos, Texas 78666

Machine Cutting Lube Info:


Machine Cutting Lube...APPLICATIONS

Machining & Cutting advantages and benefits.

    Use 10% less electric amp draw under full load and extreme cutting load.

    Cutting and machining with Mega Power produces a better finish. Cuts machining of parts by 2% time or more - With less friction at the machining or cutting point amp draw drops by 10%. Amp hours accumulative savings with-in 6 months generally exceeds product cost. Highly unusual for other brands of lube aids.

    Production increase over a years time can amount to thousands of dollars additional net earnings.

    A $99 gallon Mega Power Machine Cutting Lube Treatment treats 25 gallons of cutting/coolant or machining fluid for 6 months- [or longer; by extending the health of the fluid up to 50%] - A fluid replacement/disposal and down-time-saving of $200 per lathe/machine. Water or oil soluble. Contains viral suppressant.[6 pac $395]

Prevents friction... Machine Cutting Lube

    Tapping, Drilling, Sawing, Cutting will cool the cut and double or triple tool life. ... Add to the cooling/cutting fluid. See: Machining & Cutting paragraph, above. Made for water and oils.

APPLICATIONS: Lube...

Prevents friction... Machine Gear and Shaft Lube...

    Add 10% to gearing, shafts, and drives lube, grease, oil for quieter, smoother, years longer repair free operation. Cost per machine per year for Treatment is $99. Oil based to be blended with any oil or lube fluid. Worn machinery add to 15% volume to 85% oil/fluid.

CAR & MOTORCYCLES: Mega Power Lube Aid #1001

    Add 10% to engine, transmission, differential, power steering fluids and oils. Add 10% to grease or oil used to lube starter motor, alternator bearings, generator and solenoid shaft, wiper motors and linkages, inner control cables, motorcycle clutch & accelerator cables (Ideal for classic/vintage heavy clutch cables)

INDUSTRIAL & MINING: Mega Power Lube Aid #1001

    Add 10% to oil or grease for electric and pneumatic power tools, punching, stamping and folding equipment, conveyor and pneumatic systems lubricators, cutting, drilling and thread tapping, release agent (i.e. some plastics, metal, etc), factory roller doors, underground pump motor bearings.

MARINE & SHIPPING: Mega Power Lube Aid #1001

    Add 10% to oil or grease for sail tracks, door hinges and locks, sliding hatches and pulleys, control cables, winch cables, high speed sail and line winders, sea container hinges and latches. Engine, transmission, fuel aids.

GENERAL:

    Pin bearings, bushes, screw and worm drives, slides and small linear bearings. Gun ejector aid, barrel surface protector. See above pq.

FARMING: Mega Power Lube Aid #1001

    Add 10% to oil or grease lubing chain and sprocket drives, PTO splines and couplings, shearing hand pieces and equipment, control cables and linkages, winch cables, stock gate hinges and latches.
TRUCK, TRACTOR, BUS, HEAVY EQUIPMENT, GENERATORS

    Add 15% to oil or grease for pneumatic door tracks and linkages, side curtain tracks, alloy/stainless steel roller doors and tracks, air brake slack adjusters, inner control cables, all starter motors bearings, generators, alternators and wiper motors and all linkages, door hinges stock crate hinges and latches and any other application where an extreme pressure anti-corrosion liquid lubricant is required

COLD CLIMATE LUBRICANT:

    Mega Power #120 Spray Lube Aid: Ski bindings and snow board clips, snow mobile tracks, door hinges, locks and control cables, chair lift cables (prevents icing), cold storage door locks and hinges, helps prevent switches, solenoid and valves from icing up.

ELECTRICAL:

    Mega Power #120 Spray Lube Aid: All electric motor bushes, solenoid shaft assemblies, relay and switch gear pivot points.

HOBBIES: RECREATIONAL USES:

    Mega Power #120 Spray Lube Aid: Spray lube

    Mega Power #120 Spray Lube Aid: Model train engine bushings and gears, rolling stock wheels and track switching points, all moving parts for model sailing and power boats, model cars, slot cars and tracks and model planes. see above pq.

Contact Info: Question/Phone/email/Ordering

    George Chris 512 665 3388
    megapower@grandecom.net
    Mega Power Products Distributor
    Technical Adviser
    210 Durango Street
    San Marcos, Texas 78666<

Machine Cutting Lube...APPLICATIONS

Machining & Cutting advantages and benefits.

    Use 10% less electric amp draw under full load and extreme cutting load.

    Machine Cutting Lube for cutting and machining produces better finish. Cuts machining of parts by 2% time or more - Amp hours accumulative saving generally exceeds product expense.

    Production increase over a years time can amount to thousands of dollars additional net earnings.

Review:

    A $99 gallon Mega Power Treatment treats 25 gallons of cutting/coolant or machining fluid for 6 months- [or longer; by extending the health of the fluid up to 50%] - A fluid replacement/disposal and down-time-saving of $200 per lathe/machine. Water or oil soluble. Contains viral suppressant.
    [6 pac $395]

Prevents friction... Machine Cutting Lube...

    Add 10% to gearing, shafts, and drives lube, grease, oil for quieter, smoother, years longer repair free operation. Cost per machine per year for Treatment is $99. Oil based to be blended with any oil or lube fluid. Worn machinery add to 15% volume to 85% oil/fluid.

Prevents friction... Machine Cutting Lube

    Tapping, Drilling, Sawing, Cutting will cool the cut and double or triple tool life. ... Add to the cooling/cutting fluid. See: Machining & Cutting paragraph, above. Made for water and oils.

APPLICATIONS: Lube...

CAR & MOTORCYCLES:

    Add 10% to engine, transmission, differential, power steering fluids and oils. Add 10% to grease or oil used to lube starter motor, alternator bearings, generator and solenoid shaft, wiper motors and linkages, inner control cables, motorcycle clutch & accelerator cables (Ideal for classic/vintage heavy clutch cables)

INDUSTRIAL & MINING:

    Add 10% to oil or grease for electric and pneumatic power tools, punching, stamping and folding equipment, conveyor and pneumatic systems lubricators, cutting, drilling and thread tapping, release agent (i.e. some plastics, metal, etc), factory roller doors, underground pump motor bearings.

MARINE & SHIPPING:

    Add 10% to oil or grease for sail tracks, door hinges and locks, sliding hatches and pulleys, control cables, winch cables, high speed sail and line winders, sea container hinges and latches. Engine, transmission, fuel aids.

GENERAL Uses:

    Pin bearings, bushes, screw and worm drives, slides and small linear bearings. Gun ejector aid, barrel surface protector. See above pq.

FARMING:

    Add 10% to oil or grease lubing chain and sprocket drives, PTO splines and couplings, shearing hand pieces and equipment, control cables and linkages, winch cables, stock gate hinges and latches Spray lube oil for all firearms, roller blades and skate boards, gym and sporting equipment, mountain and racing bike chains, cables and wheel bearing hubs.

Side benefit: Stop gasket and seal leaks with continual usage.

MEGA POWER GAS AND DIESEL FUEL TREATMENT:

    Add 2 oz per gallon fuel. Fill filter with treatment when replacing. $49 gallon [6 pac $395]


Contact Infor: Question/Phone/email/Ordering

    George Chris 512 665 3388
    megapower@grandecom.net
    Mega Power Products Distributor
    Technical Adviser
    210 Durango Street
    San Marcos, Texas 78666<

Mega Power Machine Cutting Lube -Home Page

Our privacy policy