Mega Power ends Audi valve noise. Provides a quieter, yet stronger running motor in minutes

Mega Power stops Audi valve noise fast.

This review discusses the cause of the valve noise and tap and
how to install this product yourself to end the problem.

This picture illustrates how wear, friction, and residues all
contribute to valve noise.

When oil breakdown residues collect in small oil passage ways, valve lifters, on valve stems, and piston rings you hear noise from the space that opens up.

A new additive treatment from Mega Power will end your valve sticking, and tap problem.

Learn how Audi valve noise is caused by valve lifters

What you should know

Your motors sticky valves, their stems, and valve train parts can be quickly and safely cleaned using a new breed of special cleaners, friction modifiers, and conditioners from Mega Power.

Solvent based products, those sold by part stores and oil changers do clean, but remember, solvents engine flushes are lubricity killers.


Why destroy your motors lube-oil-film - using a solvent flush, which can increase abrasion on your pistons, bearings, cam lobes, and such, trying to end another problem. That's not good, is it? No!

Mega Power has addressed that negative

Using a new breed of cleaners that act as engine surface conditioners. You read that right! Let me illustrate...

Think hard concrete, hard on your bones - then relief with a new soft vinyl surface - better; get the idea. Think trying to remove a year-old dirty sticky residue with a damp rag, compared to using today's new spray formula's. The spray is better.

The Mega Power better way is by penetrating cleaning, freeing, surface conditioning, and friction modifying - all going, doing what oil can't to end the problem. A slight anti-wear film then closes the wear gap.

We call it the

"Worn Motor Treatment." The 6 products - 3 are used for top of motor valve cleaning and freeing, and 3 installed a week later for bottom, oiling side cleaning. This cleans passage-ways, frees stick lifters, valve stems, and piston rings. Its was found that it takes all 6 to do the job every time, and makes it a near-permanent solution to the valve noise problem.

The Treatment process quiets the motor comparable to when near new! That's why the 6 - a treatment shown here, quiets that engine noise - and releases power now deterred by wear and tear on your motors valves.

A trip around the block produces a quiet, impressively stronger zip, like your car use to have when near new.

Click the picture for product details ending Audi valve noise, and ordering info.