New blowby ending, power restoring product - uses motor's heat to free dirty piston rings - to fill worn cylinder space. Works fast. Permanent results!

Blowby: Contact Info: If on a smart phone, to ask a question, or order items listed ...call me. George 512 665 3388

What you should know

Excessive fumes coming into the air breather and oil fill cap is the sure sign combustion is slipping past the pistons - this is what you need to know and do....

As combustion escapes pass your motor's pistons, performance declines as sludge jams piston ring and sticky valves letting combustion escape. See  picture:

Ways to end blowby:

      One way is to overhaul your motor: $2500 up in cost.

      Another way is to install Mega Power's Blowby Motor Treatment.

While the picture covers valve problems and loss of combustion from their sticky action, sticky piston rings cannot expand - allowing combustion to be forced pass the sides of the piston in escape m ode. The fumes you have showing up is blowby. Note downward pointing arrows on this combustion escape problem. Mega Power end thoose problems for you!

Installing Mega Power to end blowby

Since engine compression loss is the result of dirty piston rings and wear space, researchers have discovered new piston-ring cleaning chemistry, with anti-wear qualities that  free and lube dirty piston rings,  stopping excessive loss of compression - BI

The product with those double benefits is Mega Power's Worn Motor Treatment.

Mega Power's approach has been to work backwards in a sense, by chemical cleaning your motor systems that cause your cars problem.

A simple 2 step method anyone can use, adding 3 items to the fuel, oil, and air intake, then 3 more to the oil a week later and driving ends the problem. Shown below.

To end blow-by, Mega Power uses six different cleaners and conditioners  installed in 2 steps. The install is simple for such a complex fix.

Your motor needs this kind of care to extend it dependable life. Order Mega Power here, and in a few days, enjoy the benefits of no more blow-by.

Order now, enjoy a restored like-near-new performance again - with the help from this invention.

To have this Worn Motor Treatment sent to you - Order today!

Just $65+ $15s&h= $80 total. Includes 6 products shown. Simple pour-in and drive instructions. Guarantee. My personal help by phone. Shipped to your door in 3 days by Fedex.

Buy two treatments for 2 cars. $140 total, including shipping, for 2 treatments - Get our MP #120 great all purpose lube spray. a $12.95 value, Free! 13 items, $140 total. Save $32.

Details of what happens to end compression loss.

  1. Cleaning the combustion area occurs as cleaners soak your motor's piston rings, freeing them up and returning a snappy expanding action to them that blocks blow-by.
  2. The second set of 3 work on piston rings that are lubricated by your motor oil. So 2 ways are covered to decrease your motor blow-by problem, and restore horsepower boosting conditions - since more combustion remains to push the piston downward.
  3. Your motor's emission system is also cleaned - allowing for normal ventilation of blow-by.
  4. Friction modifying is an special additional benefit introduced in  your Mega Power Blow-by Treatment. Friction - in a sense, labors the combustion process by adding  resistance stress factor.
  5. So, indirectly, Mega Power's anti-wear makes for releasing horsepower normally absorbed - by friction, a hidden power restoring engine benefit for you. Mega Power removes a stress factor that is a natural blow-by reducer - when present in the motor.
  6. Otherwise, more friction increases wear and blowby, so this a control factor.
  7. For wear.... Mega Power MC+ layers a protective coating on worn areas to close wear gaps - reducing blow-by and upping power output, as a result.

The above is the Mega Power method that works to end blow-by. Though complex in action, the install of Mega Power Worn Motor Treatment is easy. Driving does produce the actual blowby ending results.

The Mega Power Product method works very quickly and customers report blowby reduction in just a couple miles of driving. That is also my experience on several older, Hi-mileage cars and trucks. That Mega Power Treatment seems to be the best method to freeing your motors piston rings and by adding a conditioning to reduce cylinder wall wear space to end your motor blow-by problem.

Order Mega Power now and reclaim your motors former, like near new operation. Prices and delivery to 48 usa stateside. Shipping elsewhere is higher. Email for those delivery charges. State address, zip, item wanted, to  megapower@grandecom..net

Waiting until your motor falters and breaks can cost a $3000 motor fix, instead of a $100 one - the Mega Power way.

Guarantee. Its so good and with so few complains about its ability to stop worn motor oil burning, stop leaks, stop engine valve tapping, and stop exhaust smoking - we offer a money back guarantee - if it does not do as advertised. Of course, this includes engine blow-by, too!

Please note: 2 refunds ask for last 267 days.

This product is easy to install. Driving does the fix. Instant motor rejuvenation is what you get to enjoy again - sometimes for years! You know you need it. Order it now! Works in new cars trucks equipment. For heavy equipment read this.

Order this product below, and enjoy a restored like-near-new performance again - with the help from this invention.

To have this Worn Motor Blowby Treatment sent to you - Order today!

Just $65+ $15s&h= $80 total. Includes 6 products shown. Simple pour-in and drive instructions. Guarantee. My personal help by phone. Shipped to your door in 3 days by Fedex.

Here is how our method restores engine performance.

  • You're noticing your engine is not running as good as it use to!
  • Inspection with the motor running, show several signs of oil leakage residues.
  • Taking the oil filler cap off, you notice fumes coming out of your motor. 
  • There is oil on the engine air filter. It's not that old.
  • There is a rough idle, stalling, or tap problem your motor did not have before.
  • Your motor seems to be using a bit more oil.
  • Fuel economy is not what it use to be. A tune up did not help!
  • The motor otherwise seems OK.

Research shows each of the above are a blow-by related problem.

How additives end blow-by and related problems.

Your motor sends air, fuel, exhaust, oil - and blow-by fumes to do a very specific function to make your car motor work. Some blow-by results from normal engine functioning.

Blowby-fumes - collectively passing into and out of your motor, between oil change intervals, contain hundreds of gallons of moisture, 5 gallons or so, of unburnt fuel, several pounds of other, acidic loaded solids.

The problem that starts excessive compression loss

Since the 1970's, blow-by fumes have been trapped inside your motor and recycled back into the combustion cycle. This reduces smog and gives a boost to the motors' fuel economy. To do so, it has become part of your engines automatic tune up system. Can you see where this is going?

At some point in time - when wear has become excessive, or when dirty piston rings just become lazy, blow-by volume escaping pass the piston increases such, its beyond the scope of the motor to collect and recycle. Now what?

Sludge will form. And piston valves stick and tap, wear out rates increases, and several engine sub-systems and their parts become bogged down. It adds to the blow-by problem - which you now see affecting your motor.

That starts compression loss. A motor overhaul is its common remedy.

However, this product, the Mega Power Worn motor Treatment, ends blow-by. Mega Power does so using 6 different items found to clean, free, smooth, heal, and coat your engine, ending the blowby problem.

Will Changing oil to one weight heavier Help?

I've seen where customers have change to a lighter weight oil and the motor blowby problem worsens. Their thinking is: "a thin oil weight" may clean better and may help the motor be a little more responsive.  Yet, blowby then becomes more noticeable. Try this.... instead.

Change to a 20w 40, or 20w 50 motor oil, rather than a 0w 10, 5w 20, or 10w-30 motor oil. A larger molecule may fill wear gaps to reduce engine motor blowby. So, try a larger weight 20w 40, or 20w 50 motor oil and see if that helps stop your blowby problem. If not, Mega Power will!

This new easy-to-use piston blowby ending product works by freeing your motors piston rings and by conditioning to reduce cylinder wall wear space - a contributor to engine blowby.

What products work and what products do not, to end compression loss?

Additives for compression loss.

Some motor oil additives are sold to help reduce oil burning and blowby. I've used them to control the problem in my own cars and equipment. They have been thick, gooey products.

However, today's engines are designed to work with water-thin-0w, 5w oils and adding thick, honey-like additives for blowby like those sold in parts stores is not be good for such close-tolerance designed motors. Thick additives restrict oil delivery! Avoid those type products.

New additives to end compression loss and blowby

Since engine blow-by is the result of dirty piston rings which causes them to lose their combustion sealing ability - the main cause of blow-by. Several dirty conditions also spread to other areas of your motor. Researchers are trying new chemistry to stop blow-by - and clean these others areas of your motor to rid it of all such problems. This makes sense!

The newest and best way to clean all 6 areas of your motor and related areas is a product called the Mega Power Worn Motor Treatment.

Mega Power's approach has been to work backwards cleaning all 6 motor systems in the cleaning process, working your way to your sticky piston rings - rather than head on. To do so, Mega Power uses six different cleaners installed in 2 steps.

  1. The first 3 cleaners gives your motor a better chance to breath - it can't breath as easily if fuel, and air passage ways are carbon-ed up.  So, this is cleaned first with Mega Power.
  2. Cleaning combustion area and combustion piston rings and exhaust areas help mega Power get your piston rings to cleaan and free them. Reducing blowby begins.
  3. The second 3 work restoring power boosting conditions, those that decrease your motor blowby problem, like sticky valves and the piston oil-feed-delivery-openings in each piston.
  4. The emission system is also cleaned - allowing for proper ventilation of blowby again.
  5. Friction modifying is an ongoing benefit introduced in Mega Power for releasing horsepower normally absorbed - a hidden power restoring engine benefit for you. If left to its own, friciton increases wear and blowby increasing ways. For wear....
  6. MC+ layers a protective coating on worn areas to close wear gaps.

The above is the Mega Power method that works to end blowby. Though complex in action, the install of Mega Power Worn Motor Treatment is easy. Driving does produce the actual blowby ending results.

The Mega Power Product method works very quickly and customers report blowby reduction in just a couple miles of driving. That is also my experience on several older, Hi-mileage cars and trucks.

That seems to be the best method to freeing your motors piston rings and by adding a conditioning to reduce cylinder wall wear space to end your motor blowby problem.

Order Mega Power now and reclaim your motors former, like near new operation. Prices and delivery to 48 usa stateside. Shipping elsewhere is higher. Email for those delivery charges. State address, zip, item wanted, to  megapower@grandecom..net

Waiting until your motor falters and breaks can cost a $3000 motor fix, instead of a $100 one - the Mega Power way.

Guarantee. Its so good and with so few complains about its ability to stop worn motor oil burning, stop leaks, stop engine valve tapping, and stop exhaust smoking - we offer a money back guarantee - if it does not do as advertised. Of course, this includes engine blowby, too!

Please note: 2 refunds ask for last 267 days.

This product is easy to install. Driving does the fix. Instant motor rejuvenation is what you get to enjoy again - sometimes for years! You know you need it. Order it now! Works in new cars trucks equipment. For heavy equipment read this.

Order this product below, and enjoy a restored like-near-new performance again - with the help from this invention.

To have this Worn Motor Treatment sent to you - Order today!

Just $65+ $15s&h= $80 total. Includes 6 products shown. Simple pour-in and drive instructions. Guarantee. My personal help by phone. Shipped to your door in 3 days by Fedex.

Buy two treatments for 2 cars. $140 total, including shipping, for 2 treatments - Get our MP #120 great all purpose lube spray. a $12.95 value, Free! 13 items, $140 total. Save $32.

Order by check, MO, to address below.

George Christ. mega power blow-by
210 Durango Street. San Marcos Texas 78666
Call to ask a question or purchase by phone at 512 665 3388

Include your name, address, Phone #, email, delivery address for mail orders.