Mega Power truck equipment engine transmission fuel friction modifiers
Ordering info

These new Mega Power Truck & Equipment Friction Modifing Products

  • Will lower your cost-per-hour and cost-per-mile expenses.
  • You will measure that savings by having your cars and equipment run with fewer repairs and at peak peformance, years past what others, using other means, obtain from their type of care.
  • Mega Power makes Truck Equipment motor and gear anti wear,anti-wear possible by ingredients that clean and prevent residue buildup, prevent acid etching on critical surfaces, by smoothing worn rough surfaces, and by adding a protective, slippery coating to every part. Even the best oils and fuels can't do that.
  • Those conditions will mean a lower operating expense per vehicle that can amount to hundreds of thousands of dollars. Money you now figure in the cost of operation - you could be adding to your bottom line.

My story

    Most cargo vans run 100,000 to 150,000 miles and will need engine and transmission overhaul. Yet, mine run over 225,000 miles before needing overhaqul or replacement. This means Mega power help me gain a year or to free usage out of them, and avoid ovehaul expense. They command top used-car prices as they run so well.

    My son James also has done the same with his trucks and ditch diggers. He rents them also, to other contractors. Though they are abused that way, he finds their Mega Power benefits limit what friction wear and wear-out they receive.

    When older, they operate at peak efficentcy. He has sold two to a school district - who found they saved a $50,000 over the cost of new with these exceptionaly strong-running machines. "They sold for more than top dollar," he said.

    That is the beauty of Mega Power. Mega Power is a money saving asset - that has to do observation and a judgement call based on actual daily experience you project - just like any other business decision.

Mega Power Will Help Your Cars and Equipment Run Stronger, Longer, too

  • Mega Power does so by use of their new Hi-tech chemistry that ends wear and power detering problems on your pistons, bearings, cams, valves and gears, and by restoring the like-new finish to their surfaces, and by filling worn areas with a lo-co-efficent coating of MC+ so each internal part slides rolls, pushes and pulls with the same small resistance they had when shinny new.

  • For those reasons, you will notice all your equipment will start quicker when cold, take a few minutes less time to warm up, instantly operate with full strong power - year after year - a time savings that can mean greater production - to make up for mysterious lost production.

  • That is what you originaly bought and Mega Power restores in your cars and equipment. They add to the joy of driving and the working with your equipment - years longer than any other method of care.

Mega Power Truck Equipment motor and gear additives work by going where oils and fuels cannot to clean smooth, heal and fill worn spaces.

    There, Mega Powers MC+ ends friction drag, and metal migration,the worst kind of friction.

    Mega Power also removes residue builldup problems that cause hydraulic to work harder. Engine valves to close slower - and still be closing when the pistion is starting up on compression. this will push somme fuel back out - that is how all equipment lose power - but is noot worn out. - that Mega Power ends for you.

    Never ask your foremen or mechanic of his opinion of the product - they won't tell you. A negative outcome will cost them their job. Its your job to spend a day to determine if Mega Power is a good product. Then use our recomendations as what you want them to follow. That - they will obey, knowing the out come is on you, not them.

      Mega Power Truck Equipment motor and gear additive advantages forstall the need for premature repair downtime and costly repair.

        By removing friction drag that has increasesd over time, and the healing of metal migration, to smooth wear roughen shalfs and gears and bearings, and by the removal of residue builldup, your motors combustion volume and duration will increase.

        Mega Power Truck Equipment motor additives increase combustions expanding push so your piston spins your crankshaft two full turns insteard of 1 3/4 turns - producing more horsepower for you on less fuel.

        Power not made, now produced, along with friction modifying creates more power on the same fuel usage providing more strength to move you faster through the gears.

        By cleaning and freeing sticky rings and valves, and by smoothing surfaces moving surfaces roughen as they touch, and then by adding a protective coating to fill worn spaces, a complete anti-wear is gained.

      Mega Power Engine & Gear Friction Modifiers End Wear, Power loss, Performance Problems in Trucks, Heavy Equipment

      To ask a question, and to order products, call 1 512 665 3388... george

      Why do My Trucks and Equipment need Friction Modifiers?

      Mega Power Friction Modifiers

        And Mega Power Conditioners and anti-wear cleaners, added by the owner or mechanic to all oils, fuels, and fluids for trucks and equipment.

        These ingredients add anti-wear, and wear and tear problem-solving advantages. They provide a positive performance and fuel economy improvement. Positive conditions found to help provide a second lifetime of usage to the vehicle treated. The treatment slams the breaks on your vehicles wear-out speed. These benefits you can see, hear, touch, and feel.

      Those are common reasons

        For selecting Mega Power as part of your care and keeping of your cars, trucks, and equipment. You want and need those advantages!

        Mega Power goes where oils and fuels cannot. There, they end friction drag, metal migration, and remove residue builldup problems. These advantages Mega Power advantages forstall the need for premature repair downtime and costly repair.

        By removing friction drag that has increasesd over time, and the healing of metal migration, to smooth wear roughen shalfs and gears and bearings, and by the removal of residue builldup, your motors combustion volume and duration will increase.

        Those advantage increase combustions expanding push so your piston spins your crankshaft two full turns insteard of 1 and 3/4 turns

        So those conditions that rob power that should be going to the wheels - is once again set free to do so.

        By cleaning and freeing sticky rings and valves, and by smoothing surfaces moving surfaces roughen as they touch, and then by adding a protective coating to fill worn spaces, a complete anti-wear is gained.

      To understand

        Friction modifying advantages, try rubbing two sheets of rough sandpaper together. Its somewhat difficult. There is abrasion and resistance as the two surfaces slide past each other.

        Now, rub the two opposite sides together - the backside where just the paper is present. Movement is a lot easier. Think of that as what occurs during friction modification - as this demo points out.



      Details on product usage to correct wear and tear and performance problems can be found in the following links, or by calling me, ... george 512 665 3388


      What you should know about wear and its hidden cost

        The bigger the trucks and heavy equipment the more friction.

        The more stop and go city driving you do the more friction involved due to pressures exerted against moving parts.

      Truck Equipment Friction Modifiers - Usage.

      Correcting wear and tear and performance problems in trucks & heavy equipment.

        1- When oil is replaced, all the thin, watery stuff drains out, and a new layer of acid-loaded, wear-increasing, stuff stays glued to pistons, valves, bearings, shafts, gears, and gaskets.

        2- About a handful of this left-over oil residue will absorb enough power to slowly grind-away your power - starting from when brand new, and getting your attention, years later, at repair time.

        This problem has been corrected by chemistry genius, Bud Esterline and his Mega Power Brand of Truck & Equipment Friction Modifiers.
        3- The use of Friction Modifier chemistry added to your equipment will more than pay for them selves in fuel savings - as you go 20 to 40 more miles on each fill up - proof of benefits gained.

        4- About Mega Power testing. Most people test to see if the products advantages work as claimed. That's what most of us do.

        "If it works, that great! Lets "doped" up all we have with it. If it saves us downtime on something - that week of down-time will pay for all the Mega Power we buy."

      5- We all learn by a little out-of-the-ordinary-experimenting.

      Try this test - if you have heavy trucks and equipment.

        Order a 6 pack of MP Mega Power Oil Treatment
        Order a 6 pack of MP Diesel Fuel Conditioner
        Order a 6 pack of MP Gas Treatment
        Order a 6 pack of MP Transmission/Hydraulic Treatment

        Cost for the 4, 6-paks, are $750 plus shipping to your zip code. Call me for this. George Christ 512 665 3388 I'll get it to you in 3-5 days.

        6- This quantity of Mega Power Friction Modifiers is enough to do 2 heavy trucks and 2-3 small pick up trucks.

      7- Pick the newest and the oldest vehicles for your test.

      Follow the simple ratio of oz per gallon of oil/gas instructions.

      8- Drive the truck before and after the test. Don't count on a driver to have observation on improvement - he's a paid employee and has no interest testing for you. Check cranking time, warm up performance, Pull away power, up hill pull, and Fuel MPG checks; all will improve showing advantages at work enhancing your equipment life and performance. a million miles is now possible.
      Price list for all our products

      Home page,Truck Equipment Additives